Showing 289–312 of 884 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
0040-42-01
- Orientationneutral
- Model Typeintact
- Dimensions110mm x 110mm x 40mm Tolerances +/-1.2mm
- MaterialPUR/materials properties: Density: 41.82 PCF/0.67 g/cm3 (ISO 1183), Compressive strength:15-20 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg left distal w/ large tibia fibula a/ large 4 part foot. Fibula w/ canal
Left lower Leg distal large with tibia, fibula with canal and 4-part foot consisting of talus, calcaneus, forefoot sections and ligaments
9670
9670
- Orientationleft
- Model Typeintact
- MaterialTibia & Calcaneus: Cortical density / low cancellous bone structure / Fibula Talus and , Forefoot sections: solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T7-L5 Pelvis flex rod
Lumbar Spine from T7-L5 to Sacrum with Pelvis, with flex rod
LD9309.7
LD9309.7
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 555mm, Width: 300mm,
- MaterialCortical low density foam. Hemi-Pelvis: Cortical / cancellous bone. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
PR1613.10
- Orientationright
- Model Typeintact
- MaterialRibs 3-8: solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Canine Stifle right malformation
Right Canine Stifle malformed with femur, tibia, fibula, patella and ligaments
PR0544
PR0544
- Orientationright
- Model Typemalformation
- DimensionsOverall length: 445mm
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee large left recon w/ LCL, MCL, PCL
Left large Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, and PCL
LSH1750
LSH1750
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 895mm. Condylar width: 95mm. Tibia plateau width: 88mm Canal diameter: Femur 15mm, Tibia 10mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
LSS9320
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 780mm
- MaterialVertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Hand Bed Set
Set of two pieces of Hand Beds. Bed A: for dorsal access; Bed B: for palmar access.
PR1401
PR1401
- Orientationright
- Model Typeintact
- DimensionsLength: 500mm. Width: 200mm. Height 73mm
- MaterialPP33
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
PR1206
- Orientationneutral
- Model Typeintact
- DimensionsLength 65mm, Cortical wall: 3mm, Diameter 40mm, Cancellous bone with 0.4 - 1.2mm pores
- MaterialCortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Lower Leg right
Right lower Leg with single bone foot, fibula, tibia, talus, calcaneus, all mid-foot and phalangeal bones and ligaments
9150
9150
- Orientationright
- Model Typeintact
- DimensionsFoot length: 257mm, Malleolar width: 67mm, Lower Leg length: 440mm, Tibia canal diameter: 8mm
- MaterialTibia: Cortical / hard cancellous bone Fibula: Solid foam Foot: Solid foam low density
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LDPR1231
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm. Height: 255mm
- MaterialL4-Sacrum: Cortical low density foam. Hemi-Pelvis: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis left w/ vise attachment Ø50mm
Left Hemi-Pelvis with vice attachment, Acetabular diameter 50mm
4021
4021
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 50mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LSSPR1212
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 290mm
- MaterialVertebra: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LSS9380
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialVertebrae: Solid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine holder compact
Spine holder compact with flexible center block and rubber bands for fixation of rather short Spine segments for training.
0029
0029
- Orientationneutral
- Model Typeintact
- DimensionsLength: 280mm, Width: 100mm, Height: 125mm
- MaterialHPL and POM
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Skull hollow w/ mandible, muscles a/ vise attachment
Hollow Skull with vise attachment and muscles, with attached mandible. Without Easy Clip mechanism
8820.0
8820.0
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam, Muscle: PUR red
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium left recon w/LCL, MCL
Left medium Knee assembled with femur and tibia and elastic rubber band ligaments LCL, MCL
LS1954
LS1954
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 79mm. Tibia plateau width:76mm Canal diameter: Femur 12mm, Tibia 12mm.
- MaterialCortical soft density / low cancellous bone. Ligaments: rubber band
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1119
- Orientationneutral
- Model Typeintact
- DimensionsLength: 200mm, Width: 50mm, Height: 45mm, Density:0.25 Kg/dm3
- MaterialPUR foam gray colour
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hemi-Pelvis left w/ vise attachment Ø52mm
Left Hemi-Pelvis with vice attachment, Acetabular diameter 52mm
4022
4022
- Orientationleft
- Model Typeintact
- DimensionsAcetabular Diameter: 52mm
- MaterialSolid foam, light dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 Sacrum w/ radiopaque coating
Lumbar Spine from T10 to Sacrum with radiopaque coating
LD9370.9
LD9370.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
0880.00
- Orientationright
- Model Typeintact
- DimensionsOverall length: 297mm
- MaterialSolid foam. Humerus: cortical / cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
1585
- Orientationleft
- Model Typeintact
- DimensionsLength: 400 mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine L1-L5 w/ Sacrum, Spinal Cord, Nerves and Flava
Lumbar Spine from L1 to Sacrum with Spinal Cord, and nerves, ligaments, and flava
LSS9379.60
LSS9379.60
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 335mm
- MaterialSolid foam LSS cancellous bone density. Disk: soft flexible foam. Flava: Silicon. Nervs: rubber
- DeliveryDelivery time upon request
PRINT
LSS9369
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 195mm
- MaterialSolid foam LSS cancellous bone density, Disk: soft flexible foam
- DeliveryDelivery time upon request