Showing 457–480 of 902 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Spine bed posterior access w/ L1-Sacrum, muscles, radiopaque. Overall size 35 cm x 13 cm x 20 cm
Spine bed posterior access w/ radiopaque coated L1-Sacrum, muscles.
LDPR1313.9
LDPR1313.9
- Orientationneutral
- Model Typeintact
- DimensionsOverall size 35cm x 13 cm x 20 cm
PRINT
Knot Tying Cord Set 25pcs Ø2mm x 1200mm per/pcs
Cord Set for Knot Tying Workstation: Set of 25pcs, Thickness Ø2mm length 1200mm per/pcs
PR2111.25
PR2111.25
- Orientationneutral
- Model Typeintact
- DimensionsPacked in a plastick bag: Length: 220mm Width: 160mm Height: 20mm 25 Cords: Ø: 2mm Length: 1200mm
- MaterialPolyester
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knot Tying Cord Set 25pcs Ø4mm x 1200mm per/pcs
Cord Set for Knot Tying Workstation: Set of 25pcs, Thickness Ø4mm length 1200mm per/pcs
PR2110.25
PR2110.25
- Orientationneutral
- Model Typeintact
- DimensionsPacked in a plastick bag: Length: 220mm Width: 160mm Height: 40mm 25 pcs Cords: Ø: 4mm Length: 1200mm
- MaterialPP
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Hand and wrist right single bone w/tendons
Intact right single bone Hand with flexible joints and Radius and Ulna and with tendons
9060.11
9060.11
- Orientationright
- Model Typeintact
- DimensionsOverall length: 450mm
- MaterialSolid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Femur large left recon w/radiopaque coating
Left large Femur with pre-drilled Ø12mm canal on distal side sealed and radiopaque coating
LS2335.9
LS2335.9
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 474 mm, Condylar width: 82mm, Neck angle: 130°, Anteversion: 20°, Head Ø: 48mm, Canal Ø: 12mm
- MaterialCortical soft density / low cancellous bone structure / radio-opaque coating
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee medium left recon w/ LCL, MCL, ACL, PCL a/ notch
Left medium Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, ACL, PCL and notch
LSH2051.01.NH
LSH2051.01.NH
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Knee medium right recon w/ LCL, MCL, ACL, PCL a/ notch
Right medium Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, ACL, PCL and notch
LSH2081.01.NH
LSH2081.01.NH
- Orientationright
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 850mm. Condylar width: 75mm. Tibia plateau width: 74mm Canal diameter: Femur 14mm, Tibia 12mm.
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Standard Foam Coat for Lower Torso
Foam coat open, providing cavity, for the placement of a combination of L3-L5 Spine models with Pelvis and Proximal Femur. Bone model is not included in scope of delivery.
4202.11
4202.11
- Model Typeintact
- DimensionsLength: 460mm, Width: 330mm, Height: 220mm
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
LS1325
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsLength: 420mm. Tibial plateau width: 88mm. Canal diameter: 10mm
- MaterialCortical soft density / low cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
0040-50-11
- Orientationneutral
- Model Typeintact
- Dimensions200mm x 150mm x 6mm, Tolerances: +/-1.2mm
- MaterialPPUR/materials properties: Density: 50 PCF / 0.80 g/cm3 (ISO 1183) (ASTM 1622) Compressive strength: 40-45 MPa (ISO 604), (ASTM-D 695)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
OP-Splint overbite for BSSO osteotomie
Dental OP-Splint for Mandible with 8mm overbite occlusion for bilateral sagittal split osteotomy (BSSO)
8986
8986
- Orientationneutral
- Model Typeintact
- DimensionsLength: 70mm. Width: 64mm
- MaterialTransparent black rigid resin
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
OP-Splint underbite for Le Fort I osteotomie
Dental OP-Splint for Maxilla with 8mm underbite occlusion for Le Fort I osteotomie
8985
8985
- Orientationneutral
- Model Typeintact
- DimensionsLength: 64mm. Width: 64mm
- MaterialTransparent green rigid resin
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Foam Block 20 PCF 35x60x50 w/ cut and 12 holes
SYNBONE foam block series 20 PCF 35x60x50mm with cut and 12 pre drilled holes Ø1.5mm
0040-20-12
0040-20-12
- Orientationneutral
- Model Typeintact
- DimensionsLength: 60mm, Width: 35mm, Height: 50mm, 12 holes: Ø 1.5mm
- MaterialPUR/materials properties: Density: 20 PCF / 0.35 g/cm3 (ISO 1183) Compressive strengths: 8-12 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 20 working days
PRINT
Knee large left recon w/ LCL, MCL, ACL, PCL (expiring soon)
Left large Knee assembled with femur and tibia and slightly stretchy rope ligaments LCL, MCL, ACL, PCL
LSH1801.01
LSH1801.01
- Orientationleft
- Model Typeintact, pre-drilled canal
- DimensionsOverall length: 891mm, Condylar width: 82mm Tibia plateau width: 78mm Canal diameter: Femur 12mm, Tibia 10mm
- MaterialCortical hard density / low cancellous bone. Ligaments: Polyester slightly stretchy rope
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Generic sphere 7mm
Hollow sphere consists of 2 glued 2 hemi-spheres with a wall thickness of 7mm
PR0110.20
PR0110.20
- Orientationneutral
- Model Typeintact
- DimensionsDiameter: 190mm. Wall thickness: 7mm. Weight: 400g +/- 5%
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
4201.04
- Model Typeintact
- DimensionsLength: 460mm, Width: 330mm, Height: 220mm
- MaterialPUR Foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0104
- Orientationneutral
- Model Typeintact
- DimensionsLength: 265mm +/- 0.5mm. Diameter: 30mm. Wall thickness: 7mm. Weight: 97g +/- 5%. Quality: 085
- MaterialModified bone-like polyurethane
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Foam Block 15 PCF 110x40x30 cut
SYNBONE foam block series 15 PCF in defined dimensions with a horizontal cut
0040-15-11
0040-15-11
- Orientationneutral
- Model Typeintact
- Dimensions110mm x 40mm x 30mm, cut length: 70mm Tolerances +/-1.2mm
- MaterialPUR /materials properties: Density: 15 PCF / 0.24 g/cm3 (ISO 1183), Compressive strength:2-4 MPa (ISO 604)
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull Brain Dura Mandible
Skull with frontal sinus, maxillary sinus, septum, Brain with ventricle insides, Dura and Mandible
8770
8770
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible Solid foam Brain: Soft foam PUR Dura: elastic PUR
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Knee right arthroscopic w/ soft tissue a/ defect menisci
Right Knee with femur, proximal tibia, patella, ligaments, PCL, defect menisci and soft tissue with intermuscular fascia
PR1528.1
PR1528.1
- Orientationright
- Model Typeintact
- DimensionsOverall length: 720mm, Femur canal diameter 9,5mm
- MaterialCortical / soft cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spinal cord w/ nerves cervical C1-T1
Cervical spinal cord with nerves C1-T1. Bones not included
N9390.6
N9390.6
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 193mm
- MaterialPUR solid soft foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Spine lumbar T10-L5 Sacrum w/ radiopaque coating
Lumbar Spine designed specifically for vertebroplasty application, section from T10-L5, and Sacrum with radiopaque coating
LDPR0770.9
LDPR0770.9
- Orientationneutral
- Model Typeintact
- DimensionsLength: 390mm
- MaterialSacrum: Solid foam low density, Vertebrae T10-L5: Cortical low density / open cell cancellous bone, Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
LD9380
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 244mm
- MaterialSolid foam Low Density. Disk: soft flexible foam
- DeliveryDelivery time upon request
PRINT
Spine T10-L5 w/ Sacrum and Muscles
Lumbar Spine from T10 to Sacrum with bilateral multifidus and erector Spine muscles
LD9370.0
LD9370.0
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 420mm
- MaterialSolid foam low density. Disk: soft flexible foam Muscles: soft PUR
- DeliveryDelivery time upon request