Showing 121–144 of 1483 results
Sort by
- Article Number
- Top Sellers
- Novelties
- Title
- Price (Low to High)
- Price (High to Low)
By selecting items, you can choose which products should be printed.
PRINT
Lower Leg right
Right lower Leg with 3-part foot, tibia, fibula, talus, calcaneus, forefoot sections and ligaments
9140
- Orientationright
- Model Typeintact
- DimensionsFoot Length: 250mm. Malleolar Width: 62mm. Lower Leg Length: 440mm. Tibia canal Diameter: 8 mm
- MaterialTibia: Cortical / hard cancellous bone Fibula & Foot: Solid foam
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
4060
- Orientationneutral
- Model Typeintact
- DimensionsWidth: 305mm, Height: 160mm Acetabular diameter: 56mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
Pelvis fractured w/ vice attachment
Pelvis with Sacrum and symphysis rupture and wooden vice attachment
4061
- Orientationneutral
- Model Typefractured
- DimensionsWidth: 305mm. Height: 160mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Skull hollow w/ mandible a/ vise attachment
Hollow Skull with vise attachment, open frontal sinus, no septum, with attached mandible but without Easy Clip mechanism
8220
- Orientationneutral
- Model Typeintact
- DimensionsSkull Width: 149mm. Length: 235mm. Height: 185mm
- MaterialSkull and Mandible: Solid foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Paediatric Femur right fractured
Fractured right paediatric Femur with physis and covered with a thin layer of elastomeric polyurethane
12201.G
- Orientationright
- Model Typefractured
- AO/OTA FX Class32-D, 5.2, E/2
- DimensionsLength: 336mm, shaft diameter: 23mm, head diameter: 38mm, anteversion: 25°
- MaterialCortical / soft cancellous bone, dense
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Lower Leg left large
Left lower Leg large wwith 4-part foot, tibia, fibula, talus, calcaneus and ligaments
PR0768
- Orientationleft
- Model Typeintact
- DimensionsFoot length: 280mm. Malleolar width: 62mm. Lower Leg length: 451mm. Tibia canal diameter: 12mm
- MaterialFoot bones: solid foam. Talus and Calcaneus: light dense cancellous foam. Ligaments: rubber
- DeliveryEst. Ready to be shipped within 10 working days
PRINT
4201.02
- Model Typeintact
- DimensionsLength: 230mm Width: 135mm Height: 55mm
- MaterialPE foam
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Paediatric Femur right semi-transparent
Right paediatric semi-transparent Femur with physis
12260
- Orientationright
- Model Typeintact
- DimensionsLength: 336mm. Shaft Diameter: 23mm. Head Diameter: 38mm. Anteversion: 25°. Canal Diameter: 10.5mm
- MaterialSemi-transparent with cancellous bone in distal and proximal regions
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Paediatric Femur right semi-transparent w/ marked fracture lines
Right paediatric semi-transparent Femur with physis, with milled and marked fracture lines
12261
- Orientationright
- Model Typefracture-line marked
- AO/OTA FX Class31A1.2 (B), 32A2 (B), 33A
- DimensionsLength: 336mm. Shaft Diameter: 23mm. Head Diameter: 38mm. Anteversion: 25°. Canal Diameter: 10.5mm
- MaterialSemi-transparent with cancellous bone in distal and proximal regions
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Spine cervical C1-T1 Occiput w/ vice attachment
Cervical Spine with Occiput, vertebrae C1 to T1 and wooden vice attachment
LD9390
- Orientationneutral
- Model Typeintact
- DimensionsOverall length: 360mm
- MaterialOcciput: Solid foam, C1 to T1: Solid foam low density, Disk: soft foam, flexible
- DeliveryDelivery time upon request
PRINT
Femur large right w/ 3 part reverse intertrochanteric fracture
Right large Femur with 3-part reverse intertrochanteric fracture
LSH2251
- Orientationright
- Model Typefractured
- AO/OTA FX Class31A3.3
- DimensionsLength: 465mm, Condylar width: 86mm, Neck angle: 135°. Anteversion: 15°, Head diameter: 48mm, Canal diameter: 12mm
- MaterialCortical hard density / soft cancellous bone structure
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR0842.01
- Orientationleft
- Model Typeintact
- DimensionsLength: 373mm
- MaterialSolid foam, light dense
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
PR1704
- Orientationneutral
- Model Typeintact
- DimensionsLength: 230mm Width: 230mm Height: 208mm Clamping diameter: 30mm
- MaterialPOM; Alu; PUR
- DeliveryDelivery without Generic bone
PRINT
Hand Bed Set
Set of two pieces of Hand Beds. Bed A: for dorsal access; Bed B: for palmar access.
PR1401
- Orientationright
- Model Typeintact
- DimensionsLength: 500mm. Width: 200mm. Height 73mm
- MaterialPP33
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Mandible malunion
Mandible malunion with pre-drilled holes between teeth for wiring
8102
- Orientationneutral
- Model Typemalformation
- DimensionsMandible width: 115mm
- MaterialSolid foam
PRINT
Pelvis, male, with “T” and column fractures
Fractured male Pelvis with left side complex ilium and acetabular "T" fracture covered with periosteum and both-column fracture of the left side
4089
- Orientationneutral
- Model Typefractured
- DimensionsWidth: 305mm. Height: 160mm
- MaterialSolid foam, dense cancellous bone
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
Scapula right w/vise attachment a/glenoid labrum
Right Scapula with holding block and Glenoid Labrum
PR1323
- Orientationright
- Model Typeintact
- DimensionsLength: 192mm, Width: 120mm
- MaterialScapula: Solid foam. Glenoid labrum: PUR Shore A 35-48
- DeliveryEst. Ready to be shipped within 15 working days
PRINT
SYNMAN Compact case
Light weight SYNMAN compact stackable travel case with attachable trolley for easy transportation
PR1221.90
- Model Typeintact
- DimensionsLength: 560mm. Width: 500mm. Height: 260mm
- MaterialVarious materials
- DeliveryDelivery time upon request
PRINT
PR0669.01
- Orientationright
- Model Typefractured
- AO/OTA FX Class41C
- DimensionsLength: 387mm, Tibia plateau width: 74 mm, Shaft diameter: 27mm
- MaterialCortical / osteoporotic cancellous bone
- DeliveryDelivery time upon request
PRINT
ROB Knee Holder Rail System without transportation case
ROB Knee Holder Rail System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres sets and reference foot left. In duffle bag transportation packaging
0037.05
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 373 mm, Width: 258 mm, Height: 177 mm
- MaterialAnodised aluminum, stainless steel, POM, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
ROB Knee Holder System without transportation case
ROB Knee Holder System for Arthroplasty workshops to hold various SYNBONE knee models in a free selectable position. Delivered with two Femoral Head Hemispheres Sets and reference foot left. In single use transportation packaging only.
0037.01
- Orientationneutral
- DimensionsROB Knee Holder: Maximum length: 505mm, Width: 297mm, Height: 610mm
- MaterialHolder: Anodised aluminum, stainless steel, SLS DF-HST and other various materials
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Skull Holder System (silver) incl. transportation case
Skull Holder System on a Tray for CMF / NEURO workshops to hold various SYNBONE skull models in a free selectable position. Delivered in a solid transportation case with foam inlays. Skull models are NOT included in delivery.
0038.50
- Orientationneutral
- Model Typeintact
- DimensionsDimensions Holder: Length: 360mm, Width: 240mm, Height: 280mm // Dimensions Case: Length: 410mm, Width: 340mm, Height: 205mm
- MaterialHolder: Anodised aluminum, stainless steel and POM Case: Copolymer polypropylene
- DeliveryEst. Ready to be shipped within 25 working days
PRINT
Spine Holder for invasive navigation complete
Large Spine holder including Spine lg holder insert and navigations pin for large lumbar spine L1-Sacrum
PR1608.40
- Orientationneutral
- Model Typeintact
- DimensionsLength: 294mm. Width: 204mm. Height: 170mm
- MaterialVarious material
- DeliveryEst. Ready to be shipped within 30 working days
PRINT
Spine Holder insert w/ cranial plate
Spine holder insert with cranial plate and pins
PR1608.10
- Orientationneutral
- Model Typeintact
- DimensionsLength: 262mm. Width: 140mm. Height: 113mm
- MaterialPolyamide
- DeliveryEst. Ready to be shipped within 15 working days